Maximizing The Lifespan Of Your Paint Protection Film: Tips And Tricks

0
67

Paint protection film, or PPF, is a great way to protect your vehicle from rock chips and other damage, but it’s not a permanent solution. You’ve got to maintain it if you want it to last as long as possible. Here are some tips and tricks for maximizing the lifespan of your paint protection film:

The Importance Of Adhering Your Paint Protection Film

It is important to adhere your paint protection film to the vehicle. The film can be adhered using a pressure washer, or a roller. The key is to press the film into the surface of the car and not stretch it. If you are using a pressure washer, make sure that you apply enough force to ensure an even application of adhesive over all surfaces where paint protection film has been applied.

Perform Regular Maintenance

As with any type of protective film, the key to maximizing its lifespan is maintaining it. This means keeping it clean and free from dirt, debris and other contaminants that can cause damage to the paint underneath. To do this you’ll want to use a microfiber towel to remove as much loose dirt as possible before washing your car (if you’re washing). If water has gotten trapped between layers of film then use a spray bottle filled with water at low pressure so as not to dislodge any pieces that may have come loose during installation or removal. You can also use this same method if there are oil stains on the surface of your paint protection film because these will cause damage over time if left untreated; however make sure not too much pressure is used when applying because this could lead to more problems than just having an oily spot on your new addition!

Use A Microfiber Towel For Application

While you can use cotton towels, paper towels and even rags to apply your paint protection film (PPF), the best option is a microfiber cloth. Microfiber towels are made from polyester and nylon fibers that are split into strands so tiny they’re virtually invisible to the naked eye. This makes them incredibly soft, which means they’ll buff away any residue from transferring over from your vehicle’s paint job when applying PPF onto it. It also helps prevent marring any existing waxes or sealants on your car’s surface by not allowing any debris from scratching through them during installation.

Use A Spray Bottle To Assist With Removal

You may find that removing the film is a little more difficult than you expected. If so, use a spray bottle with water to assist with removal by spraying the film with water and using a plastic scraper or credit card to remove it from your car’s surface. Then, use a microfiber towel to remove any remaining residue from your paint surface. If you’re looking for a way to protect your car from scratches and dings, film is an excellent option. However, if you want something that will last longer than a few months, then this may not be the best option for you. Instead, consider applying a paint protection film or coating to your vehicle instead—these options tend to last longer because they’re bonded directly to the surface of your paint.

Apply The Film Correctly

The following are some tips for applying your paint protection film correctly:

  • Apply the film to a clean, dry surface. If you’re unsure whether or not your vehicle’s paint is clean, it’s best to wash it first before applying any type of coating (including PPF).
  • Apply the film on a cool surface. Paint protection films are designed to withstand high temperatures but not heat up themselves. If you attempt to apply PPF in direct sunlight or on an extremely hot day, there’s potential for those temperatures and UV rays from the sun itself to affect how well that coating adheres itself perfectly without air bubbles underneath it–which could lead directly into cracking off pieces from said piece later down the road as well as other problems like bubbling up around edges where two pieces meet together tightly enough but not tight enough so nothing gets trapped under there!

Hire A Professional Paint Protection Film Installer

If you’re going to spend the money on paint protection film, it’s important that you get it installed right. Most people will choose a professional installer because they want the best possible results and know that a trained technician will do a better job than they would. A good BWM paint protection film installer will be insured and have access to better tools and equipment than an amateur could obtain on their own, which means they can perform the installation faster and with fewer mistakes (or at least fewer obvious ones).

A professional installer also has experience working with different types of paint protection films as well as different makes, models and years of cars–especially if he or she works for an auto dealership! This is important because not all PPF brands are created equal; some work better than others depending on what type of car they’re being applied onto (e.g., matte finishes don’t always hold up well under UV light).

How To Remove And Reposition The Paint Protection Film

When you’re removing the film, it’s best to start with the hood and fenders. This will allow you to access any areas that were covered by these panels later on. Next, remove any body panels that were covered by paint protection film (such as doors or fenders). It should be easier to remove this type of film from windows last because they’re usually narrow and hard-to-reach areas.

To help prevent damage during removal, we recommend using a microfiber towel instead of something sharp like a razor blade or box cutter; this will ensure that your paint remains undamaged!

Regular Maintenance Is Important To Maximizing The Lifespan Of Your Paint Protection Film

Regular maintenance is important to maximizing the lifespan of your paint protection film. The frequency of maintenance depends on several factors, including climate and driving conditions. If you don’t perform regular maintenance, the film can become brittle and break down over time.

Conclusion

The key to maximizing the lifespan of your paint protection film is regular maintenance. If you take care of your car and keep up with the maintenance, then you can expect to have it last for many years. The paint protection film will also last longer if you adhere it properly, use a microfiber towel when applying or removing it from your vehicle and hire a professional installer who knows what they’re doing when applying this type of product onto your vehicle’s surface area.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.